PRODUCT DATA SHEET
Date: 11/24/2024
Doc ID: 6EA27E
Spinnaker
550 Summit Avenue
Troy, Oh 45373
800 543-9452



2.0 mil Matte White Polyester (2024) ** GPR™. ** 3.5 mil (50#) LF
Item#: 0050291
Recommended Print Type(s) to Test
Laser

Facestock: 2.0 mil Matte White Polyester (2024)A top-coated, matte white polyester film featuring excellent laser print quality, adhesion, and durability. Features excellent print resolution, good resistance to weathering, and chemical resistance. Suitable for printing by all conventional printing processes, continuous laser, and thermal transfer (subject to ribbon compatibility).
 
Typical Value
Basis Weight:51.6 #/3300 ft2
Caliper:2.0 mils
Tensile MD/CD:16000 / 19000 PSI
Elongation @ Break MD/TD:115 / 90%
Adhesive: GPR™. A general purpose acrylic removable adhesive designed to remove cleanly from a wide variety of substrates. It is engineered to give excellent tack with minimal building of adhesion over time from a variety of surfaces. It is appropriate for laser applications..
Coat Weight:15 #/3300 ft2
Coat Weight:22.2 grams/m2
Caliper:.6 mils
Adhesion to Stainless Steel, oz. (90° Peel):13
Loop Tack, oz.:24
Service Temperature:-40 to 200 °F
Minimum Application Temperature:40 °F
Shear (1000g):35 minutes
Release Liner: 3.5 mil (50#) LFThe 3.5mil layflat is a bleached white, MG liner designed specifically to be compatible with high and medium speed cut-sheet laser and ink jet printers. This product is well suited for applications requiring a high degree of layflat. A small amount of clay is applied to the backside of the paper to enhance printability.
 
Typical Value
Basis Weight:50 #/3000 ft2
Caliper:3.5 mils
Tensile MD/CD:35 / 14 #/inch
Tear MD/CD:50 / 75 grams
Opacity:89%
 
Total Product Caliper: 6.1 mils
Product Basis Weight Per MMSI: 256.00 #
Shelf Life: 12 month(s) when stored at 72° F, 50% RH		For application recommendations call 877-210-5104
For samples or other questions please call your Sales Representative.



Important Notice
These are typical values and should not be considered a specification. Adhesive properties were tested with a film facestock unless denoted with an asterisk(*).

All trademarks are the property of their respective owners.

All information, recommendations for use, product designations, and descriptive materials about Spinnaker Pressure Sensitive Products, LLC products are believed to be reliable, but the furnishing of such information, recommendations for use, product designations, and descriptive material is for informational purposes only and does not constitute a warranty of any kind by Spinnaker Pressure Sensitive Products, LLC. Because of the variety of possible applications for Spinnaker's products and the continuing development of new applications, all Spinnaker Pressure Sensitive Products, LLC products are sold with the understanding that each purchaser will independently determine the suitability of any product for the purchaser's intended application, converting, and print processes. Spinnaker Pressure Sensitive Products, LLC will review, and may modify the information contained in this document from time to time and customers should ensure they have the most recent information.

Last Revision: 10/08/2024