Veero NTC DT ** Infusion® ** Bloom hi-mpact®

Item#: 0050118
Recommended Print Type(s) to Test Direct Thermal Papers

---

Facestock: Veero NTC DT	A direct thermal facestock designed for short-duration labeling. It is not suitable for applications requiring water or chemical resistance (including solvents, oils, fats, or similar substances). This component is not available for custom constructions.
	Typical Value
Basis Weight:	50 #/3300 ft2
Caliper:	3.1 mils
Tensile MD/CD:	37 / 17
Tear MD/CD:	47 / 51 grams
Opacity:	87%
Brightness:	86%

---

Adhesive: Infusion®	Hybrid Adhesive System with excellent tack and ultimate adhesion to a variety of surfaces including polystyrene, polypropylene, polyethylene, paper and corrugate. Suitable for cold, damp labeling applications. Exceptional high speed and wider web converting.
Caliper:	.7 mils
Service Temperature:	-65 to 160 °F
Minimum Application Temperature:	20 °F

---

Release Liner: Bloom hi-mpact®	A1.6mil glassine liner that is excellent for die cutting, stripping and label dispensing. Primarily for roll-to-roll applications.
	Typical Value
Basis Weight:	27.7 #/3000 ft2
Caliper:	1.6 mils
Tensile MD/CD:	23 / 9 #/inch
Tear MD/CD:	28 / 29 grams

---

Total Product Caliper: 5.4 mils Product Basis Weight Per MMSI: 169.41 # Shelf Life: 12 month(s) when stored at 72° F, 50% RH

For application recommendations call 877-210-5104 For samples or other questions please call your Sales Representative.

Important Notice
These are typical values and should not be considered a specification. Adhesive properties were tested with a film facestock unless denoted with an asterisk(*).

All trademarks are the property of their respective owners.

All information, recommendations for use, product designations, and descriptive materials about Spinnaker Pressure Sensitive Products, LLC products are believed to be reliable, but the furnishing of such information, recommendations for use, product designations, and descriptive material is for informational purposes only and does not constitute a warranty of any kind by Spinnaker Pressure Sensitive Products, LLC. Because of the variety of possible applications for Spinnaker's products and the continuing development of new applications, all Spinnaker Pressure Sensitive Products, LLC products are sold with the understanding that each purchaser will independently determine the suitability of any product for the purchaser's intended application, converting, and print processes. Spinnaker Pressure Sensitive Products, LLC will review, and may modify the information contained in this document from time to time and customers should ensure they have the most recent information.

Last Revision: 05/23/2023