SFA™ (2020)

A clear, general purpose, emulsion acrylic permanent adhesive designed for applications with film facestocks. SFA exhibits excellent ultimate adhesion to polyethylene, polypropylene and glass. Well suited for small, cylindrical labeling. Limited testing shows this adhesive to be glove friendly, but application testing is recommended.

 

Adhesive Technology:	Acrylic
		Caliper:	.6 mils
Minimum Application Temperature:	15°F	Service Temperature:	-40°F to 240°F

  
Regulatory & Compliance -

Complies with 16 C.F.R 1500.3(b)(5) Not considered toxic by oral ingestion (oral toxicity) Complies with 16 .C.F.R 1500.3(c)(4) Not a primary (skin) irritant Complies with 16 .C.F.R 1500.3(c)(4) Not an ocular (eye) irritant Complies with 21 CFR 175.105 indirect food contact Complies with 21 CFR 801.437, does not contain natural rubber latex (NRL) or dried rubber Complies with H.R. 4173, the Wall Street Reform and Consumer Protection Act. Section 1502, conflict minerals from the DRC zone

Heavy Metal Regulations -

Complies with CONEG / Toxics in Packaging Complies with CPSIA - toy safety Complies with RoHS Directive

Applications:

Recommended for testing:		Not recommended for testing:
healthy & beauty print-and-present manual labeling squeezable containers drum & barrel pharmaceutical including test tubes & vials; is glove friendly		application freezer conditions apparel & textiles

 

Recommended Storage and Shelf Life:

12 month(s) when stored at 72° F, 50% RH

Important Notice
These are typical values and should not be considered a specification. Adhesive properties were tested with a film facestock unless denoted with an asterisk(*).

All trademarks are the property of their respective owners.
All information, recommendations for use, product designations, and descriptive materials about Spinnaker Pressure Sensitive Products, LLC products are believed to be reliable, but the furnishing of such information, recommendations for use, product designations, and descriptive material is for informational purposes only and does not constitute a warranty of any kind by Spinnaker Pressure Sensitive Products, LLC. Because of the variety of possible applications for Spinnaker's products and the continuing development of new applications, all Spinnaker Pressure Sensitive Products, LLC products are sold with the understanding that each purchaser will independently determine the suitability of any product for the purchaser's intended application, converting, and print processes. Spinnaker Pressure Sensitive Products, LLC will review, and may modify the information contained in this document from time to time and customers should ensure they have the most recent information.

Last Revision: 05/19/2020