A-122F

A-122F is a clear all temperature permanent pressure sensitive emulsion acrylic adhesive featuring excellent adhesion to a variety of surfaces over a broad temperature range. A-122F has excellent converting characteristics on press. The high initial tack of A-122F to low surface energy polyolefins makes it an ideal for blow on applications

 

Adhesive Technology:	Acrylic
		Caliper:	.5 mils
Minimum Application Temperature:	-10°F	Service Temperature:	-65°F to 200°F

  
Regulatory & Compliance -

* 21 CFR 175.105 for indirect food contact in the presence of a functional barrier * 21 CFR Part 801 for natural rubber content * 16 CFR 1500.3 oral toxicity * 16 CFR 1500.3 (c) (4) for Primary Dermal Irritation

Heavy Metal Regulations -

* CONEG * Toy Safety

Applications:

Recommended for testing:		Not recommended for testing:
Blow on applications Freezer applications Hot fill applications Health and beauty aid applications House hold chemical labels

 

Recommended Storage and Shelf Life:

12 month(s) when stored at 72° F, 50% RH

Important Notice
These are typical values and should not be considered a specification. Adhesive properties were tested with a film facestock unless denoted with an asterisk(*).

All trademarks are the property of their respective owners.
All information, recommendations for use, product designations, and descriptive materials about Spinnaker Pressure Sensitive Products, LLC products are believed to be reliable, but the furnishing of such information, recommendations for use, product designations, and descriptive material is for informational purposes only and does not constitute a warranty of any kind by Spinnaker Pressure Sensitive Products, LLC. Because of the variety of possible applications for Spinnaker's products and the continuing development of new applications, all Spinnaker Pressure Sensitive Products, LLC products are sold with the understanding that each purchaser will independently determine the suitability of any product for the purchaser's intended application, converting, and print processes. Spinnaker Pressure Sensitive Products, LLC will review, and may modify the information contained in this document from time to time and customers should ensure they have the most recent information.

Last Revision: 09/27/2022