SafeTE™ Synthetic

A polyolefin-based, clay-coated film design It is waterproof, tear resistant, and resists temperature fluctuations. It is grease resistant. This facestock has been specifically designed to easily delaminate, showing tamper evidence, when used with an aggressive adhesive.

  

Recommended Storage and Shelf Life:

12 month(s) when stored at 72° F, 50% RH

Print Recommendations: (excellent-good-fair-poor)

Flexo:			Laser - Desktop:
Letterpress:			Laser - Commercial:
Screen:			Ink Jet - Desktop:
Offset:		Good	Ink Jet - EFI Jetrion/UV:
Gravure:			HP Indigo - sheet fed:
Thermal Direct:			HP Indigo - web/roll fed:
Thermal Transfer:
Handwriting **:

**Handwriting tested with ball point pens (typically oil-based ink) and permanent Sharpie markers. Results may vary by brand. Water-based inks such as roller ball, cartridge or gel type pens vary greatly in testing.


Important Notice
These are typical values and should not be considered a specification. Adhesive properties were tested with a film facestock unless denoted with an asterisk(*).

All trademarks are the property of their respective owners.
All information, recommendations for use, product designations, and descriptive materials about Spinnaker Pressure Sensitive Products, LLC products are believed to be reliable, but the furnishing of such information, recommendations for use, product designations, and descriptive material is for informational purposes only and does not constitute a warranty of any kind by Spinnaker Pressure Sensitive Products, LLC. Because of the variety of possible applications for Spinnaker's products and the continuing development of new applications, all Spinnaker Pressure Sensitive Products, LLC products are sold with the understanding that each purchaser will independently determine the suitability of any product for the purchaser's intended application, converting, and print processes. Spinnaker Pressure Sensitive Products, LLC will review, and may modify the information contained in this document from time to time and customers should ensure they have the most recent information.

Last Revision: 04/05/2018