| adhesive | minimum application | service range | | description |
|---|
| 4LZ™ (2020) | 15 °F | -40 °F to 240 °F |  | This acrylic adhesive provides excellent ultimate adhesion to a wide variety of substrates and designed to be compatible with most low-speed and high-speed laser printers. |
| A-122F | -10 °F | -65 °F to 200 °F | | A-122F is a clear all temperature permanent pressure sensitive emulsion acrylic adhesive featuring excellent adhesion to a variety of surfaces over a broad temperature range. A-122F has excellent converting characteristics on press. The high initial tack of A-122F to low surface energy polyolefins makes it an ideal for blow on applications
|
| A-BC-20™ | 10 °F | -50 °F to 145 °F | | A-BC-20 is a light coat weight of BC-20 cold temperature permanent. It is a hot melt, rubber based pressure adhesive featuring excellent adhesion to a variety of packaging materials and other substrates over a wide temperature range. In field processing, A-BC-20 standard constructions have displayed excellent die cutting and stripping characteristics. |
| AmpClamp™ | 45 °F | -50 °F to 240 °F | | A specialty battery hot melt adhesive designed to adhere aggressively to textured polypropylene, typical of battery casings, while withstanding the rigors of heat, chemical, and moisture present in these applications. Paired with the appropriate facestock, it tests well in a number of OEM adhesion and acid tests such as GMW14573 label spec. Not for other automotive / underhood applications. |
| ATP™ | -20 °F | -65 °F to 200 °F | | An all-temperature permanent acrylic adhesive suitable for a wide variety of applications with paper facestocks providing exceptional converting characteristics that allow stripping of intricate die patterns as well as wide-web, high-speed processing. |
| B-122™F | -10 °F | -65 °F to 200 °F | | A clear all temperature acrylic adhesive featuring excellent adhesion to a variety of surfaces with film facestocks. It covers a broad temperature range and has excellent converting characteristics on press. The high initial tack of B-122F to low surface energy polyolefins makes it an ideal for blow on applications |
| B-82 | 40 °F | -50 °F to 150 °F | | A general purpose hot melt adhesive with excellent quick-stick properties and long-term adhesion to a broad range of surfaces. |
| B-91 | 40 °F | -40 °F to 200 °F | | A removable adhesive providing excellent medium to long-term removability with minimal or no adhesive residue on a wide variety of substrates, particularly hard, smooth surfaces. |
| B-92 | 40 °F | -40 °F to 200 °F | | An aggressive general-purpose removable adhesive with medium initial tack. It will act as a permanent on smooth surfaces over long time periods or when used with paper facestocks. |
| BC-20™ | 10 °F | -50 °F to 145 °F | | A cold temperature hot melt adhesive featuring excellent adhesion to a variety of packaging materials and other substrates over a wide temperature range. It displays good die cutting and stripping characteristics. This adhesive performs well on wet and oily/greasy applications. |
| BP-164 | 40 °F | -50 °F to 150 °F | | A general purpose hot melt adhesive with excellent quick-stick properties. This adhesive exhibits excellent adhesion to a broad range of packaging surfaces and has improved die cutting and stripping attributes compared to other hot melt rubber based adhesives. |
| BP-52 | 40 °F | -40 °F to 200 °F | | A general purpose acrylic adhesive with excellent die cutting characteristics and ultimate adhesion to a broad range of substrates. Well suited for small, cylindrical labeling and is glove friendly. |
| C-122F | -10 °F | -65 °F to 200 °F | | A premium drum and barrel acrylic adhesive for film facestocks that provides excellent adhesion to painted metal, polyolefin and fiber drums in all weather conditions. As a heavy coat weight of B-122F, It is well suited for the most demanding of label applications. |
| CLD-10 | 10 °F | -50 °F to 145 °F | | An economical cold temperature hot melt adhesive for a broad range of cold temperature applications needing high initial tack with excellent die cutting and stripping properties. The adhesive performs well when there is light moisture present during application. |
| Cryogenic | 39 °F | -320 °F to 248 °F | | A high tack solvent acrylic with excellent adhesion to small diameter test tubes and ampules. This adhesive resists edge lifting when repeatedly subjected to changes between extremely low temps and room temp, such as removal from liquid nitrogen. This component is not available for custom constructions. |
| FC-125 | 10 °F | -40 °F to 170 °F | | A specialty hot melt adhesive designed for application to the skin of edible raw fruits and vegetables when used with an appropriate face material. This adhesive does meet the FDA requirements under the 21 CFR 175.125(b)(2) for adhesives. |
| Frostbite™ | -15 °F | -65 °F to 160 °F | | A highly aggressive rubber based adhesive featuring excellent initial tack and ultimate adhesion when applied at freezer conditions. Also an excellent choice when applied to packaging materials at room temperature and then subjected to –40F blast freezing conditions. It will adhere to variety of surfaces despite specific amounts of frost and /or moisture (testing is recommended).
When used in warm environments (above room temperature), you will experience ooze and have converting issues. |
| GPR™. | 40 °F | -40 °F to 200 °F | | A general purpose acrylic removable adhesive designed to remove cleanly from a wide variety of substrates. It is engineered to give excellent tack with minimal building of adhesion over time from a variety of surfaces. It is appropriate for laser applications.. |
| GripTight™ | 40 °F | -30 °F to 150 °F | | An aggressive hot melt rubber-based adhesive designed for difficult surfaces which may include building materials, manufactured products or components, packaging materials, horticultural products, plastics and wovens. While GripTight™ is a heavy coat weight, it will die-cut, strip and dispense well compared to other similar aggressive adhesives - no adhesive pattern application needed. |
| HTR-1 | 40 °F | -40 °F to 200 °F | | A removable adhesive providing excellent medium to long-term removability. Designed to resist flow at elevated temperatures of continuous and sheet-fed lasers, it offers consistent adhesion, minimal build and clean removability from a variety of substrates, particularly hard, smooth surfaces. |
| LiftOff™ | 30 °F | -20 °F to 140 °F | | A hot melt removable adhesive featuring excellent long-term removability. Good initial adhesion and clean removability allows for use on a variety of surfaces. |
| MP376 | 35 °F | -65 °F to 180 °F | | An aggressive, acrylic emulsion general-purpose permanent adhesive yielding excellent adhesion to a wide variety of surfaces, including corrugated and low energy surfaces. |
| Oil Tolerant | 41 °F | -40 °F to 212 °F | | Oil tolerant is an acrylic adhesive that absorbs oils, enabling strong adhesion to lubricated surfaces. No surface degreasing required and more efficient application. |
| PDL-09 | 35 °F | -10 °F to 200 °F | | A cold temperature emulsion acrylic adhesive with excellent properties for drum labels. Die-cuts very well and is an excellet choice for roll-to-sheet labels. |
| PDL-55 | +25 °F | -25 °F to 180 °F | | An aggressive emulsion acrylic designed for drum label applications. |
| PRM-650 | 50 °F | -40 °F to 180 °F | | An aggressive emulsion acrylic appropriate for indoor and outdoor labeling. |
| RSM-92 | 18 °F | +10 °F to 150 °F | | a removable, emulsion acrylic adhesive with good performance for indoor and outdoor use. |
| RSM-95 | 50 °F | -40 °F to 180 °F | | a removable, emulsion acrylic adhesive with good performance for indoor and outdoor use. |
| SC-21 | 25 °F | -50 °F to 140 °F | | A robust hot-melt adhesive exhibiting excellent adhesion and quick tack to a broad range of surfaces over a wide application temperature range. It displays the superior converting caracteristics of an acrylic and wide web converting is excellent. |
| SFA™ (2020) | 15 °F | -40 °F to 240 °F | | A clear, general purpose, emulsion acrylic permanent adhesive designed for applications with film facestocks. SFA exhibits excellent ultimate adhesion to polyethylene, polypropylene and glass. Well suited for small, cylindrical labeling. Limited testing shows this adhesive to be glove friendly, but application testing is recommended. |